Kurs/Prototyping med FPGA

From Programvareverkstedet
Jump to navigation Jump to search

Tid: Torsdag 4. november 2010, kl. 18:15
Sted: R9
Kursholder: Odd Rune S. Lykkebø

The course will take a stab at explaining the common basics of commercial FPGAs. We will then demonstrate the basics of hardware design languages (HDL) and present an example of prototyping a design in FPGA where we go slightly in-depth about the tools used and the results they produce. We will also touch briefly on the subject of achieving timing closure in high-speed designs.

The course is aimed at people interested in hardware.

The prerequisites are:

- Some knowledge on basic electrical engineering; if you can piece together how a ripple-carry adder works, you're within scope.